John Deere 5200 Problems

The John Deere 5200 is a popular model of tractor, but it’s not without its problems. One common issue is the transmission slipping, which can be caused by a few different things. First, the transmission oil may be low or dirty, so it needs to be changed.

Second, the clutch may need to be adjusted or replaced. Third, the transmission itself may need to be rebuilt or replaced. If you’re having trouble with your John Deere 5200, take it to a qualified mechanic for diagnosis and repair.

John Deere 5200 clutch and other problems part 1

If you’re a John Deere 5200 owner, you may have experienced some problems with your tractor. Here are some of the most common issues reported by owners, along with advice on how to fix them. One of the most common problems is that the PTO doesn’t engage properly.

If this happens, first check the PTO switch to make sure it’s in the right position. If it is, then there may be a problem with the wiring or the clutch itself. Another common issue is that the engine stalls when idling.

This can be caused by a number of things, including a dirty air filter or carburetor, low oil levels, or an ignition problem. If you’re having trouble with your John Deere 5200 tractor, don’t despair! With a little troubleshooting, you should be able to get it running smoothly again in no time.

John Deere 5200 Hydraulic Problems

If you’re a John Deere 5200 owner, then you know that this tractor is built for heavy-duty work. But even the toughest machines can have problems, and hydraulic issues are some of the most common complaints with the 5200. Here’s what you need to know about John Deere 5200 hydraulic problems, and how to fix them.

One of the most common John Deere 5200 hydraulic problems is leaks. These can happen in any part of the system, but they’re most likely to occur at seals and gaskets. If you see fluid leaking from your tractor, it’s important to identify the source and repair it as soon as possible.

Otherwise, your hydraulics could fail completely, and that would be a disaster. Another common issue is air in the system. This can cause all sorts of problems, from decreased performance to complete failure.

If you suspect there’s air in your hydraulics, bleed the system according to the instructions in your owner’s manual. That should get rid of the problem. If your John Deere 5200 hydraulics are having other issues, like poor performance or strange noises, then something else might be going on.

It could be a clogged filter or pump problem. Or there could be an issue with one of the valves or cylinders. Whatever the case may be, it’s best to take your tractor to a qualified technician for diagnosis and repair.

Don’t let hydraulic problems put a damper on your farming operation!

John Deere 5200 Problems


How Much Horsepower Does a 5200 John Deere Have?

John Deere 5200 horsepower The John Deere 5200 has a maximum horsepower of 55.9 HP at 2,800 RPM. This machine is powered by a 4-cylinder John Deere PowerTech 4045H engine that delivers consistent power and performance.

It also comes with a hydrostatic transmission that makes it easy to operate.

What Does a John Deere 5200 Weigh?

There are a few different models of the John Deere 5200 tractor, so the weight can vary slightly. The base model 5200 weighs in at around 6,200 pounds. However, if the tractor is outfitted with certain attachments or add-ons, the weight can increase by a few hundred pounds.

For example, adding a loader to the 5200 will add about 1,000 pounds to the overall weight of the tractor. So, depending on what specifications and attachments your John Deere 5200 has, the weight of the tractor can range from 6,200 to 7,200 pounds.

How Much Oil Does a John Deere 5200 Take?

John Deere 5200s use approximately 3.5 gallons of oil.

What is the Horsepower of a John Deere 4840?

The John Deere 4840 is a tractor that was introduced in 1979. It had a six-cylinder, turbocharged diesel engine that produced 175 horsepower. This model was replaced by the John Deere 4940 in 1985.


The John Deere 5200 tractor is a workhorse that can be found on farms and construction sites across the country. But like any machine, it is not without its problems. The most common issue with the 5200 is engine oil leaks.

These leaks can be caused by a number of factors, including worn seals and gaskets, damaged engine parts, or even improper installation. Other common problems with the 5200 include electrical issues, fuel system problems, and hydraulic leaks. While these issues can be frustrating, they can often be resolved with some troubleshooting and patience.

Leave a Comment