John Deere 556 Baler Problems

The John Deere 556 baler is a popular model of baler that is used by farmers to bale hay. However, this baler has been known to have some problems that can cause it to break down or not work properly.

If you’re a John Deere 556 baler owner, you may have experienced some problems with your machine. Here are some of the most common issues that owners have reported: • The main drive belt has been known to come off or break.

This can be a real pain, since it’s not an easy fix. You’ll need to replace the entire belt, which can be expensive. • Another problem that has been reported is that the bale chamber doesn’t always close properly.

This can cause the hay to spill out and make a mess. It’s a good idea to check this regularly and make sure it’s closing correctly. • Some owners have also had trouble with the hydraulic system.

This can be caused by leaks or other problems. If you’re having trouble with your hydraulics, it’s best to take it to a professional for repairs.

John Deere 566 Baler Issues Explained

What is the Most Reliable Square Baler?

There are a few factors that go into what makes a square baler the most reliable. First, you want to look for a baler with minimal moving parts. The fewer parts there are, the less likely it is something will break down.

Second, you want to choose a baler that is made from high-quality materials. This will ensure it can withstand regular use and wear and tear. Finally, you want to make sure the company who makes the baler has a good reputation for reliability and customer service.

One square baler that meets all of these criteria is the John Deere 336 Baler. It has just four main moving parts, so there’s less that can go wrong. It’s also built tough, with heavy-duty components like cast iron gear cases and a reinforced frame.

And John Deere is known for making dependable equipment that is backed by excellent customer service.

What Pto Hp Do I Need for Round Baler?

In order to determine the amount of PTO horsepower (HP) that you need for your round baler, it is important to understand how a round baler works. A round baler is a machine that is used to gather crop material, such as hay or straw, and compress it into a cylindrical shape. The bale is then tied with twine or wire and can be stored for later use.

Round balers typically require between 20-60 HP, depending on the size and model of the machine. For smaller machines, 20-30 HP may be sufficient. However, for larger machines or those that will be bailing heavier materials, 40-60 HP may be necessary.

It is always best to consult with the manufacturer of your particular machine to determine the specific HP requirements.

When Should I Replace My Round Baler Belt?

It’s always a tough call to make when deciding whether or not to replace your round baler belt. There are a few key factors that you need to keep in mind when making this decision. The first is the condition of the belt itself.

If the belt is starting to show signs of wear and tear, then it’s probably time to start shopping for a new one. Another factor to consider is how often you use your baler. If you’re using it on a daily basis, then it’s going to wear out much faster than if you only use it once in awhile.

Finally, think about the cost of a new belt versus the cost of repairs if something goes wrong while you’re using an old one. In most cases, it’s cheaper in the long run to just buy a new belt outright.

How Many Hp Do You Need to Run a Hay Baler?

There is no definitive answer to this question as it depends on a number of factors, such as the size and type of hay baler you are using. However, a good rule of thumb is that you will need at least 40 HP to run a small hay baler, and 60 HP or more to run a larger one. If you are using a very large hay baler, you may even need 100 HP or more.

Ultimately, it is best to consult with the manufacturer of your particular hay baler to determine how much horsepower is required for optimal performance.

John Deere 556 Baler Problems


John Deere 556 Baler Specs

The John Deere 556 Baler is a large square baler that produces bales that are approximately 4 feet by 4 feet. This model of baler is designed for use with tractors that have a PTO output of at least 65 horsepower. The 556 Baler has a number of features that make it an excellent choice for those who need to produce high-quality hay or straw on a regular basis.

One feature of the 556 Baler that makes it stand out is its ability to produce very dense bales. This is due in part to the fact that the baler has an extra set of rollers that help to compress the hay or straw as it is being fed into the chamber. As a result, bales produced by the 556 Baler tend to be much heavier than those produced by other models on the market.

Another impressive feature of this model is its Bale Trak Monitor system. This system allows the operator to keep track of how much material has been fed into the chamber and how many bales have been produced. The monitor also displays information about the density of each bale, which can be helpful in ensuring that all bales are consistent in weight and density.

Overall, the John Deere 556 Baler is an excellent choice for those who need to produce high-quality hay or straw on a regular basis. The machine’s ability to produce dense bales and its Bale Trak Monitor system make it easy to produce consistent, high-quality product.


If you’re a John Deere 556 baler owner, then you may have experienced some of the common problems that have been reported. These include issues with the bale chamber not fully opening, the bale chute not staying in place, and the machine not picking up hay properly. While these problems can be frustrating, there are some things that you can do to troubleshoot and fix them.

Leave a Comment