John Deere is one of the most popular brands of balers on the market, but that doesn’t mean they’re perfect. One common problem that John Deere owners face is knotter problems. The knotter is responsible for tying the bales of hay together, so if it’s not working properly, it can be a real pain.
There are a few different things that can cause knotter problems, and we’ll go over some of the most common ones here.
If you own a John Deere baler, you may have experienced knotter problems. The knotter is the part of the baler that forms the knots in the bales of hay. If it isn’t working properly, your bales will be loose and won’t hold together.
There are a few things that can cause knotter problems. One is if the needles aren’t aligned properly. Another is if the timing is off on the knotter.
And finally, if there is too much or too little tension on the twine, that can also cause problems.
If you’re experiencing knotter problems, the first thing to do is check the needles and make sure they’re aligned correctly. If they seem to be off, you can try adjusting them yourself or taking your baler to a dealer to have it done.
Next, check the timing on your knotter. This can be adjusted by moving either the top or bottom arm of the knotter assembly. Again, if you’re not comfortable doing this yourself, take it to a dealer for help.
Finally, check tension on your twine spools. There should be just enough tension so that when you pull on the twine, it doesn’t come off easily but also isn’t too tight so that it’s difficult to tie knots.
John Deere 24 Square Baler Knotter Problems
How Do You Fix Knotter Problems?
If your corn harvester is having issues with the knotter, there are a few things you can do to try and fix the problem. First, check to see if the needles are dull or damaged. If they are, replace them with new ones.
Next, check the timing of the knotter. It may be off, which can cause problems. Adjust it according to the manufacturer’s instructions.
Finally, clean out any debris that may be clogging up the knotter. This includes dirt, straw, and corn husks. If you still can’t get the knotter to work properly, you may need to call a technician for help.
How Do I Get Rid of Baler Knotter?
If you find yourself with a baler that has a knotter issue, there are a few things you can do to try and fix it. First, check the drive chain to make sure it is tight and not skipping. If the chain is loose, tighten it up and see if that fixes the issue.
If the drive chain is fine, then the next thing to check are the bearings in the knotter assembly. These bearings can sometimes get worn out and cause problems. Replacing them is usually pretty straightforward and should fix the issue.
Finally, if all else fails, you may need to replace the entire knotter assembly. This is usually a last resort, but if nothing else works it may be your only option.
How Do You Adjust a Hay Baler?
The process for adjusting a hay baler is actually quite simple. First, you’ll need to find the right spot on the hay bale where you want to make your adjustment. Next, you’ll need to loosen the tension on the hay bale by loosening the bolts that hold it in place.
Once you’ve done this, you can start to adjust the height of the hay bale by moving it up or down until it’s at the desired level. Finally, once you’re happy with the adjustment, simply retighten the bolts and enjoy your newly adjusted hay baler!
What Do Tucker Fingers Do on a Baler?
There are many types of balers, but most balers have a set of “tucker fingers” on the front or side that are used to push the baled material into the chamber. The tucker fingers help to keep the material in place so it can be properly compacted.
Credit: www.yesterdaystractors.com
John Deere 348 Baler Knotter Problems
If you’re a John Deere 348 baler owner, chances are you’ve experienced some knotter problems. Maybe your knots are coming out too loose, or maybe they’re breaking. Either way, it’s frustrating.
There are a few things that can cause knotter problems on the 348. First, make sure that the tension on the twine is correct. If it’s too tight, the knots will be too tight and may break.
If it’s too loose, the knots will be too loose and may come undone.
Another thing to check is the condition of your knives. If they’re dull or damaged, they may not be cutting the twine cleanly, which can cause knotting problems.
Be sure to keep your knives sharp and in good condition.
Finally, if you’re still having trouble with your knots, there are a few adjustments that can be made to the knotter itself. Consult your owner’s manual for more information on how to do this.
If you’re experiencing knotter problems with your John Deere 348 baler, don’t despair! With a little troubleshooting, you should be able to get things back on track again in no time.
Conclusion
If you’re a John Deere baler owner, you may have experienced knotter problems. The good news is that there are some simple steps you can take to fix the issue. First, check the timing of your knots.
If they’re not tight enough, your bales will come undone. You can also adjust the tension on your twine by turning the knob on the side of the machine. If you’re still having trouble, it’s best to consult your John Deere dealer for further assistance.