Troubleshooting New Holland 311 Baler Problems: Expert Solutions

One common problem with new holland 311 balers is knotter failure. Solutions may include adjusting the knotter or repairing or replacing the parts.

New holland 311 balers are known for their durability and efficiency. These balers are ideal for small farm operators and can handle a wide variety of crops. However, like any other baler, they are prone to mechanical problems that can cause significant downtime, resulting in lost revenue for farmers.

One of the most common issues that new holland 311 baler operators face is knotter failure. The knotter is responsible for tying the bales, and any malfunction can lead to improperly tied bales or, worse, no tied bales at all. This article will explore the various problems that new holland 311 baler operators may experience with their knotter and provide solutions to fix them.

Common Issues With The New Holland 311 Baler

The new holland 311 baler is a reliable machine that farmers trust for haymaking. However, like any other machine, it’s not immune to problems. In this post, we’ll discuss the common issues with the new holland 311 baler. We’ll also provide you with possible solutions to help you troubleshoot the machine’s issues without having to spend heavily on a repair specialist.

Knotter Problems

The knotter is the area in the baler where twine is tied around the bales. If you encounter issues with the knotter, it could be due to the following reasons:

  • The twine is of low quality.
  • The billhook isn’t adjusted properly.
  • The needle’s timing is off.
  • The twine disk is worn out or dirty.

Baler Not Starting

If your baler won’t start, there are several factors that might be causing the problem. These include:

  • Check the battery if it is connected and fully charged
  • Check the fuses for any blown ones.
  • Check the wiring and connections for corrosion, deterioration or looseness
  • Check the positioning of the safety switches
  • Check for broken or malfunctioning solenoids

Bale Chamber Issues

The baler chamber is the area where hay is collected and formed into bales. Here are some common issues that you might encounter with your baler chamber.

  • The hay is too dry or too wet, causing it to stick to the chamber’s walls.
  • The feeding auger is clogged or blocked.
  • The chains or bearings aren’t lubricated correctly.
  • There’s an issue with the hydraulic system.

Baler Not Tying Bales

Tying twines properly is a crucial aspect of baling, and if your baler isn’t doing so, it could be due to the following:

  • The knotter mechanism isn’t adjusted correctly or needs new parts.
  • The twine disks are worn out or dirty.
  • The billhook isn’t sharp or in good condition.
  • The twine isn’t the correct size or has knots in it.

By keeping an eye out for these common issues, you can troubleshoot many problems with your new holland 311 baler. Regular maintenance, including checking the machine’s fluids, lubrication, and cleanliness, can also go a long way in preventing potential issues from arising.

Remember to keep these tips in mind so that you can get the most out of your haymaking equipment.

The Causes Of New Holland 311 Baler Problems

If you’re an operator of a new holland 311 baler, it’s essential to understand why this baler can develop problems, leading to malfunctioning and breakdowns.

Poor Maintenance

One of the primary causes of new holland 311 baler problems is poor maintenance. Regular equipment maintenance is critical in ensuring a baler’s longevity, reliability, and optimal performance. Here are a few critical points:

  • Irregular inspection and maintenance of belts, chains, and bearings can lead to breakage and costly repairs.
  • Dirt, dust, and debris accumulation in the baler can harm moving parts, leading to malfunctioning.
  • Dirty or dirty oil levels can cause hydraulic issues, which can lead to overheating and breakdowns.

Misuse And Operator Error

Misuse and operator error is another significant cause of new holland 311 baler problems, which can harm the equipment and lead to failure. Here are some points worth considering:

  • Overloading the baler can cause stress and permanent damage to critical components, leading to premature breakdown.
  • Incorrect operation of the baler, such as starting it with insufficient lubrication or operating it at a speed that is too high, can lead to harm to the equipment.
  • Incorrect use of the baler, such as underestimating the size of the material input or using the wrong type of material, can cause significant damage to the baler.

Equipment Age And Wear

New holland 311 balers have moving parts that wear and tear over time. Invariably, the machine will eventually develop problems due to the age and wear of equipment parts. Here are critical points:

  • Timely replacement of worn or defective parts can be expensive, but the alternative is premature failure of parts leading to malfunction and breakdowns.
  • Overusing old belts or chains can lead to decreased performance of the baler, leading to increased risk of breakdowns.
  • Keeping records and knowing the baler’s history can help predict and prevent issues, including identifying parts that need replacement in time.

Solutions For Knotter Problems

When it comes to baling, the knotter is one of the most vital components. Proper functioning of the knotter ensures a consistent, high-quality bale. On the other hand, issues with the knotter can cause numerous headaches. Here are some solutions for knotter problems with your new holland 311 baler:

Checking And Adjusting The Knotter

Regularly checking and adjusting your knotter can prevent significant problems from occurring. Follow these steps to ensure your knotter is functioning correctly:

  • Make sure to refer to the operator’s manual before starting any inspections or adjustments.
  • Check the timing of both knotter components until you find the correct timing.
  • Look for any signs of wear and tear, related to knotter’s components such as knotters frame, needle bracket, billhook etc
  • Verify that the needle’s alignment is proper, and they move freely in the needle bracket block.
  • Finally, ensure that needles are not bent, and the billhook even if pitted or starting to look worn.

Replacing Knotting Components

If inspection and adjustment fail to address your knotting issues, it might be time to replace the knotting components. Keep in mind the following process when replacing knotting components:

  • Read the operator’s manual for the correct type of components you need to replace.
  • Before starting the replacement process, mark all the removed components’ orientation for correct alignment while assembling.
  • Get the right size and quality of knotting components to ensure durability and prevent any recurrence of the issue.
  • Finally, assemble the components carefully by following the operator’s manual and ensure to make all the required adjustments we explained earlier.

Regular Cleaning And Inspection

It is essential to keep up with regular cleaning and inspection to ensure your knotter works efficiently. Here’s what you should do:

  • Thoroughly inspect the knotter components for any dirt or debris that may have accumulated.
  • Gently clean all the components without applying force; you can use a brush or compressed air.
  • Ensure all components are dry, especially needles, to avoid rusting.
  • Inspect knotters frame, needle bracket, and billhook edges for sharpness and do the maintenance accordingly.

By implementing these solutions, you will have a better understanding of your new holland 311 baler knotter problems and ways to solve them. With the necessary maintenance, your baler will continue to produce high-quality bales, save you money, and help prevent any severe efficiency problems from arising.

Solutions For Baler Not Starting

New Holland 311 Baler Problems: Solutions For Baler Not Starting

If you’re facing the problem of your new holland 311 baler not starting and want to quickly get back to work, don’t worry! Here are some ways to diagnose the problem easily and fix it without any hassle.

Checking Power Supply And Battery

One of the common culprits behind your baler not starting could be a weak power supply or a dead battery. Here’s what you can do:

  • Check the battery for any visible signs of damage or corrosion. Ensure it is fully charged and has a proper connection.
  • Check the power supply and its connections for any damage or loose connections. If necessary, replace any faulty components.

Inspecting Electrical Connections

Faulty electrical connections can also pose a problem in your baler’s starting mechanism. Here are some ways to inspect them:

  • Inspect all the electrical connections for any visible damage or loose connections.
  • Clean the connections using a wire brush or abrasive pad before testing them for continuity.
  • Test all connections for continuity using a multimeter and replace any faulty components as necessary.

Cleaning Fuel System

If your baler has been under maintenance or not in use for a long time, it’s possible that the fuel system may have become clogged with debris or contaminants. Here are some ways to clean it:

  • Drain the fuel tank and check for any visible debris.
  • Replace the fuel filter and clean the fuel pump strainer if necessary.
  • Inspect the fuel lines for any damage or cracks and replace them as necessary.

By following these simple steps, you can diagnose and fix your new holland 311 baler’s starting problem and get back to work in no time.

Solutions For Bale Chamber Issues

New Holland 311 Baler Problems

The new holland 311 baler is a great piece of equipment for baling hay and straw. However, sometimes it may experience issues with the bale chamber that can prevent it from functioning properly. In this section, we will provide solutions for some of the most common bale chamber issues, including checking timing and adjustment, replacing damaged components, and aligning baler feeder.

Checking Timing And Adjustment

One of the most common issues that new holland 311 baler owners face is the timing and adjustment issues of the bale chamber. Here are some key points you need to know to check and adjust the timing and adjustment:

  • The timing of the baler is critical to its proper operation. It ensures that various components such as plunger, needles, and knotter are working in sync to create uniform and consistent bales.
  • Balers come with a timing chart that shows the correct position of each component. You should follow this chart when checking or adjusting the timing of the baler.
  • The timing of the baler can be checked using special tools such as a timing pin or a timing light.
  • Baler adjustment involves fine-tuning the tension of various components to ensure that they work optimally. A properly adjusted baler will produce tight, dense, and uniform bales.

Replacing Damaged Components

Another common issue with baler chambers is damaged components. These components need to be replaced to ensure the baler functions properly. Here are key points to consider when replacing damaged components:

  • Always follow the maintenance schedule provided by the manufacturer. This will help you identify worn out components and determine when they need to be replaced.
  • Two of the most common damaged components in a baler are plunger wear plates and needle guards. Plunger wear plates protect the plunger from wear and tear, while needle guards protect the needles from damage.
  • In addition to these components, you should also keep an eye on other critical parts such as feeder forks, knotter blades, and the knotters themselves.

Aligning Baler Feeder

Feeding hay and straw into the baler can cause alignment issues, preventing the baler from functioning properly. Here are key points you need to know to align baler feeder:

  • The baler feeder should be aligned and leveled correctly to ensure even feeding of hay and straw into the baler chamber. This will help prevent blockages and ensure that the baler produces uniform bales.
  • To align the baler feeder, you should ensure that the feeder is level both forward and backward and side to side.
  • Check that the feeder forks are not bent and are properly aligned with the crop ears.
  • Keep an eye on the pickup teeth, which should also be uniformly spaced and in good condition.

New holland 311 baler is a fantastic piece of equipment for baling hay and straw, but it may experience issues with its bale chamber. By checking timing and adjustment, replacing damaged components, and aligning baler feeder, you can keep your baler functioning at peak performance and produce uniform, dense, and tight bales.

Solutions For Baler Not Tying Bales

New holland 311 baler problems: solutions for baler not tying bales

New holland 311 baler is a reliable and efficient equipment for baling hay, but like any machine, it can experience problems. One of the most common issues is when the baler does not tie bales. Here are some solutions to this problem.

Adjusting Tension And Timing Of Twine Arms

Adjusting the tension and timing of twine arms can solve the problem of the baler not tying bales. Here are the steps to check and correct the tension and timing:

  • Check and ensure that the twine arms are synchronized with the baler’s needles.
  • Adjust the twine arm tension by loosening or tightening the tension spring as required.
  • Check the twine path and make sure it is clear of any obstruction.
  • Adjust the twine arm timing by changing the cam follower position on the twine drive shaft.

Replacing Damaged Components

If the tension and timing adjustment does not work, there may be some damaged components that need replacement. Here are the parts to check:

  • Check the knotters and replace any broken or worn out parts.
  • Check the needles and replace any damaged needles as required.
  • Check the bill hooks and replace any worn out or damaged bill hooks.

Regularly Cleaning Twine Path

Regular cleaning of the twine path can prevent the baler from not tying bales. Here are the steps to follow in cleaning the twine path:

  • Clean the twine path after every 250 bales or as advised in the user manual.
  • Remove any twine debris from the twine path.
  • Check and clean the knotters regularly.
  • Regularly lubricate the knotters, needles, and bill hooks.

The solutions to the new holland 311 baler not tying bales include adjusting the tension and timing of twine arms, replacing damaged components, and regularly cleaning twine path. By following the above steps, you can keep your baler running smoothly and efficiently.

Preventive Maintenance Checklist For New Holland 311 Baler

New holland 311 baler problems – preventive maintenance checklist for new holland 311 baler

If you’re a farmer who owns a new holland 311 baler, then you probably rely on it to deliver high-quality bales of hay for your animals. However, like any other piece of machinery, your baler needs regular maintenance to keep it working efficiently, especially during the busy harvest season.

Here’s a preventive maintenance checklist for your new holland 311 baler that will help you avoid potential problems and keep your baler in top condition.

Daily Maintenance

Daily maintenance is the most critical aspect of keeping your baler in good condition. Here are some essential aspects that you should check on a daily basis:

  • Check hydraulic fluid levels and top off as needed.
  • Inspect the baler’s belts for wear and tear, and tighten or replace if necessary.
  • Check the twine disc and knotters for any debris or twine build-up that could cause tangling and blockage.
  • Ensure that all safety guards and shields are in place and intact.
  • Clean the baler of any accumulation of chaff, dust, stalks, and twine.

Weekly Maintenance

Weekly maintenance is a comprehensive inspection to ensure that everything is running in good order. Here are some of the aspects that you should check on a weekly basis:

  • Inspect the pickup area for any worn-out or damaged teeth and replace them if necessary.
  • Inspect the plunger and the wiper arm for wear and tear and replace them if needed.
  • Check for any loose bolts or nuts or any signs of abnormal wear.
  • Inspect the preservative applicator for any blockage, debris, or leakage.

Seasonal Maintenance

Seasonal maintenance typically involves thorough cleaning, lubrication, and replacing worn-out parts at the end of the harvest season. Here are some aspects you should concentrate on during seasonal maintenance:

  • Check the pto components for wear and tear and lubricate or replace them if necessary.
  • Inspect the pickup for any wear and replace the pickup bands.
  • Remove the knotters and clean thoroughly. Ensure that they’re not worn and if worn, replace them immediately.
  • Apply a general lubrication to all moving parts, including the driveshaft and gearbox.
  • Thoroughly clean the baler, removing any buildup of dust, chaff, and other debris.

Keeping your new holland 311 baler well-maintained is crucial to avoid potential problems and keep it working efficiently. Follow this preventive maintenance checklist, and you will enhance your machine’s productivity and save yourself from costly repairs and downtimes. Happy baling!

Frequently Asked Questions On New Holland 311 Baler Problems

What Are Common Problems With New Holland 311 Balers?

The most common new holland 311 baler problems are knotting issues, feed problems, and safety concerns. Knotter problems include misaligned needles, tangled twines, or tight knots that won’t hold. Feed problems include uneven bales, feed rollover, or sticking plunger. Safety concerns may include improper plunger motion, damaged belts, or missing guards.

How To Troubleshoot Knotting Issues On New Holland 311 Balers?

To troubleshoot knotting issues on new holland 311 balers, start by checking the needle alignment and condition, and twine path. Ensure twine is properly threaded, not too tight or too loose, and evenly spaced. Check the knotter timing and knife condition.

Decrease bale tension, and try different bale types or lengths. If the problem persists, consult the manual or a qualified mechanic.

How To Fix Feed Problems On New Holland 311 Balers?

To fix feed problems on new holland 311 balers, check the plunger condition, cleanliness, and alignment. Check the pickup unit, tines, and position. Clear any obstructions and debris, adjust the rotor speed, and decrease bale density. Ensure the bale chamber is not overloaded, and try different hay conditions or swath widths.

If the issue persists, consult the manual or a qualified mechanic.

How To Improve Safety On New Holland 311 Balers?

To improve safety on new holland 311 balers, always follow the manufacturer’s guidelines and recommendations. Use appropriate personal protective equipment, such as gloves, closed-toe shoes, and safety glasses. Keep all guards and shields in place and make sure they are not damaged.

Inspect and maintain all machine components regularly, and never attempt to modify or disable any safety features.


After analyzing the major problems of the new holland 311 baler, one can conclude that it is crucial to maintain the baler regularly. The most common problems can be easily avoided by keeping the parts clean, replacing the necessary components on time and using high-quality lubricants.

Inoperative hydraulic systems, worn-out belts, and blockages are some of the issues that can cause significant damage, often leading to costly repairs and downtime. Owners and operators must be knowledgeable about troubleshooting and maintenance to keep the baler running efficiently.

The new holland 311 baler is an essential piece of equipment on farms, and proper care is crucial. To reduce the risk of issues, it is vital to follow manufacturer guidelines and ensure proper upkeep. By doing so, one can avoid significant problems and increase the lifespan of the baler while maximizing productivity.

Leave a Comment